Idea 1 — Thermal environment for surface assets
15 November 2026. One of six ideas; read 00-overview.md
first. Source numbers refer to its section 8. Compiled with AI (Claude);
not re-checked by a person. "Judgement" marks an assessment.
Product in one line
For a chosen site, asset height and surface orientation, the tool returns time series of absorbed solar flux, infrared flux from the surrounding terrain and sink temperature, with a stated uncertainty, through lunar day, night and shadow periods.
Decision it supports
A thermal engineer sizes radiators, heaters, batteries or an RHU, and chooses where an asset can park or hibernate. Today the engineer starts from a flat-plane assumption or builds a terrain model by hand.
Why now
- NASA's thermal environments team states that no generic model gives worst-case hot and cold conditions for polar regions, partly because orbital temperature data are too coarse. Its flat-plane and terrain models disagree most at the South Pole [9].
- In 2026 NASA taught engineers a manual procedure: a 60 m LOLA elevation model, MATLAB, MeshLab and Thermal Desktop, for south polar sites only [10].
- A NASA payload solicitation presented in January 2023 (PRISM 3) offered a CLPS service whose threshold is survival through one lunar night [11]. Firefly's first Blue Ghost mission ran about 5 hours into the night; a later mission will carry an RHU package to test night survival (news) [12].
- VIPER cannot endure more than 50 hours of continuous darkness, so its parking places are planned in advance [37].
- LUPEX will demonstrate "over-night resistance", a technology that JAXA will reuse for its crewed pressurised rover [6]. Night survival is a goal for the Argonaut Mission 1 payloads (C finding 3).
What exists
- In-house: NASA's team for Artemis landers [9][10].
- Published methods: a one-dimensional regolith model validated with Diviner [13]; a three-dimensional radiative model coupled to a regolith model, compared with Diviner at Shackleton [14].
- Claims without evidence: MoonHacker lists thermal modelling (A2 finding 7). CNES Spaceship FR lists temperature per surface point as a concept (A2 finding 5).
- A European supplier of asset-level thermal environment data: not found in A, A2 or two searches in this chat.
Data basis and checks
- Terrain: LOLA 5 m site models with 100 clones (B finding 1).
- Measured reference: Diviner polar temperatures at 240 m (B finding 4). The check is to aggregate model output to 240 m and compare.
- In-situ reference outside the pole: Chandrayaan-3 measured 332 K on a flat spot about 1 m from the lander at about 69°S, and the authors derived a slope model [15]. Published values can be cited; the raw data are for non-profit use (B finding 5).
- Known uncertainty: regolith thermal conductivity below about 100 K is poorly measured and changes model results in cold polar terrain [38].
- Data class: model output on measured terrain is derived. On interpolated terrain cells the class follows the open decision in B section 6 (c).
Type A slice (TRL 3)
| CF | Function | Check |
|---|---|---|
| CF1 | Terrain-coupled flux model at one site: Sun as a disc, reflected light, infrared from surrounding terrain | Surface temperature aggregated to 240 m against Diviner |
| CF2 | Sink temperature for an asset at a user-set height and orientation | Cross-check against the published NASA flat-plane and terrain cases [9]; this is a comparison between models, not with measured data |
| CF3 | Uncertainty from terrain clones and regolith property ranges | Share of Diviner observations that fall inside the predicted range |
Out of the Type A slice: any site on demand, PSR interiors, dust on surfaces, export to thermal analysis tools, coupling with a power model.
Users outside ESA (candidates; none contacted)
- United States: CLPS 2 lander companies [1], PRISM payload teams, night-survival hardware makers such as Zeno Power.
- Japan: LUPEX rover team, developers of thermal devices funded by the SSF (a heat switch for lunar night survival at Iwate University) [7].
- Europe, non-ESA: Argonaut payload primes, ispace-Europe, Space Applications Services, Maana Electric (C section 3).
Four tests (judgement)
- Unique: pass. No European supplier found. Risk: NASA publishes its procedure, so the method is not new.
- Feasible: pass in sunlit terrain. Weak inside PSRs, where Diviner pixels are large and regolith properties are uncertain.
- Needed: pass. Stated by NASA; implied by CLPS, LUPEX and Argonaut night-survival goals.
- Fits Type A: pass. Three critical functions, one site, measured reference data.
Link to ESA programmes and path beyond TRL 3
Argonaut Mission 1 payloads and MAGPIE (C findings 3). Next step: a second site, PSR interiors, and use by one payload team.
Risks and unknowns
- Thermal analysis experience is not shown in the CV on file. Martin's CV is pending [TBD].
- Resolution gap: the check is at 240 m, the product is at 5 m. Agreement at 240 m does not prove the 5 m values.
- ESA activities on lunar thermal environment tools: not checked.
- Whether thermal engineers accept external environment data without their own model: not known.