SELIS V2 / alternative-directions

Idea 4 — Power network layout planner

15 November 2026. One of six ideas; read 00-overview.md first. Source numbers refer to its section 8. Compiled with AI (Claude); not re-checked by a person. "Judgement" marks an assessment.

This idea extends the working candidate from A3 (power siting with a stated confidence for one asset). It is the smallest step away from the work done so far.

Product in one line

For a set of loads and candidate positions at a site, the tool lays out generation masts, storage and distribution (cable routes or LoS power-beaming links) and returns the delivered-power availability for each consumer, with uncertainty, including consumers in shadow.

Decision it supports

A power developer decides how many masts, how high, where, and how to reach a consumer that sits in shadow. A single-asset illumination map cannot answer this, because shadows at neighbouring points are correlated.

Why now

What exists

Data basis and checks

Type A slice (TRL 3)

CF Function Check
CF1 Availability at one mast with a calibrated uncertainty Does the predicted spread contain what dated NAC images show? (A3 section 4, point 3)
CF2 LoS between two assets, and cable-route length and slope, with terrain uncertainty LoS: predicted mutual visibility against shadow geometry in NAC images [TBD method]. Route: comparison of the 5 m model with 1 m terrain where it exists
CF3 Joint availability of a layout of two or three assets Lit or shadowed state at the asset points in the same dated image

Out of the Type A slice: layout optimisation, mass and cost trades, dust on arrays, thermal coupling (idea 1), orbital beaming geometry.

Users outside ESA (candidates; none contacted)

Four tests (judgement)

Argonaut Mission 1 payloads and their power supply (C finding 3). Next step: a second site, optimisation, and use by one power developer in its own design study.

Risks and unknowns